SMC Networks LER Series, Руководство по эксплуатации, Страница: 6 / 48

- 5 -
8mm
(3) Power supply plug
Communication
cable
PC
(7) Controller
setting kit
位 置 速度
100 500
200
1000
50 200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現 在位 置
120.3
現 在速 度 200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定 位 置 速度
100 500
200
1000
50 200
1
2
3
ﾃｽﾄ
ﾃｽﾄ
ﾃｽﾄ
現 在位 置
120.3
現 在速 度 200
mm
mm/s
動作 中
ア ラーム
モニ タ
設定
1. Procedure before operation/simple setting to use straight away
The controller is already set with the data of the actuator.
With the simple setting “easy mode”, it can be operated and running parameters can be changed easily.
1.1 Preparation
(1) Items to be prepared
Please check on the label, and the quantity of accessories, to confirm that it is the product that was
ordered.
Table 1. Componets
Table 2. Items to be prepared by the customer
No. Part name Qty
(1) Electric Rotary Table 1
(2) Controller 1
(3) Power supply plug 1
(4) Actuator cable 1
(5) I/O cable (Not use in this section) 1
(6) Teaching box 1
(7)
Controller setting kit
[The controller setting software, The communication cable, USB cable and conversion unit are included.]
Setting software / version 1.1or higher
1
Part name Conditions
Power supply 24VDC
Except
“inrush-current
restraining type”
Refer to power consumption of each actuator
Wire AWG20 (0.5mm
2
)
Power supply plug
Wiring
Connect the plus side of DC 24V to the C24V, M24V and EMG terminals of the power
supply plug, and the minus side to the 0V terminal. When conformity to UL is required,
the electric actuator and controller should be used with a UL1310 Class 2 power supply.
Stripped wire length
To CN3
(4)
Actuator cable
(6) Teaching box
or
To USB port
Option
To CN2
To CN4
(1) Electric Rotary Table
To CN1
Electrical wire entry
Push the open/ close lever
and insert the wire into the
electrical wire entry.
0V
M24V
EMG
C24V
24V
0V
DC 24V
power
supply