- 13 -
4.
Product Specifications
！
Warning
1. Install and operate the product only after reading the Operation Manual carefully and
understanding its contents. Also, keep the manual where it can be referred to as necessary.
2. When installing the products, allow access for maintenance.
3. Do not scratch or dent the air gripper by dropping or bumping it when mounting.
Slight deformation can cause inaccuracies or a malfunction.
4. Tighten the screw within the specified torque range when mounting the attachment.
Tightening with a torque above the limit can cause malfunction, while insufficient tightening can
cause slippage and dropping.
4-1. Attachment
Attachment for testing is included in the product. For mounting and removal of the attachment, refer to
the drawing below. When tightening, fix the finger attachment with a tool such as a spanner so that the
load is not directly applied to the guide while tightening.
Make sure to mount the attachments on fingers with the tightening torque in the table below by
using bolts, etc., for the female threads on fingers.
Hexagon socket head cap screw(M3x7)
Max.tightening torque:0.59 Nm
Model
Bolt
Max.tightening
Torque (Nm)
JMHZ2-16D
M3x0.5
0.59
Attachment
Guide section
