ITV2-TF2Z363EN
Page 2 of 2
6 Input state for Preset pressures
Preset
pressure
S3
S2
S1
S0
P01
OFF
OFF
OFF
OFF
P02
OFF
OFF
OFF
ON
P03
OFF
OFF
ON
OFF
P04
OFF
OFF
ON
ON
P05
OFF
ON
OFF
OFF
P06
OFF
ON
OFF
ON
P07
OFF
ON
ON
OFF
P08
OFF
ON
ON
ON
P09
ON
OFF
OFF
OFF
P10
ON
OFF
OFF
ON
P11
ON
OFF
ON
OFF
P12
ON
OFF
ON
ON
P13
ON
ON
OFF
OFF
P14
ON
ON
OFF
ON
P15
ON
ON
ON
OFF
P16
ON
ON
ON
ON
7 How to Order
Refer to the operation manual or catalogue on the SMC website (URL:
http//
for How to order information.
8 Outline Dimensions
Refer to the operation manual or catalogue on the SMC website (URL:
http//
for outline dimensions.
9 Maintenance
9.1 General maintenance
Caution
Not following proper maintenance procedures could cause the product
to malfunction and lead to equipment damage.
If handled improperly, compressed air can be dangerous.
Maintenance of pneumatic systems should be performed only by
qualified personnel.
Before performing maintenance, turn off the power supply and be sure
to cut off the supply pressure. Confirm that the air is released to
atmosphere.
After installation and maintenance, apply operating pressure and
power to the equipment and perform appropriate functional and
leakage tests to make sure the equipment is installed correctly.
If any electrical connections are disturbed during maintenance, ensure
they are reconnected correctly and safety checks are carried out as
required to ensure continued compliance with applicable national
regulations.
Do not make any modification to the product.
Do not disassemble the product, unless required by installation or
maintenance instructions.
Ensure all air is exhausted from the product before maintenance.
10 Limitations of Use
10.1 Limited warranty and disclaimer/compliance requirements
Refer to Handling Precautions for SMC Products.
11 Product Disposal
This product shall not be disposed of as municipal waste. Check your
local regulations and guidelines to dispose of this product correctly, in
order to reduce the impact on human health and the environment.
12 Contacts
Refer to www.smcworld.com or www.smc.eu for your local
distributor/importer.
URL :
https:// www.smcworld.com (Global) https:// www.smc.eu (Europe)
SMC Corporation, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, Japan
Specifications are subject to change without prior notice from the manufacturer.
©
2021
SMC Corporation All Rights Reserved.
Template DKP50047-F-085M
