Precautions for Design
Warning
(1) Keep the load/resistance within the specified range.
Operation outside of the specification range may cause damage to the product or operation
failure.
(2) Air is the applicable fluid for this product. Please contact us when fluids other than air are used.
Usage of inapplicable fluids may cause fluid leakage or malfunction.
(3) Use within the specified voltage and current.
Use of a voltage or current outside of the specifications can cause malfunction, damage to the
switch, electric shock or fire.
When the load capacity of the motor is large, use a magnet switch as well as relay.
(4) Not suitable for vacuum pressure area.
If it is operated with vacuum pressure, it may cause malfunction.
(5) This product uses a reed switch. If the chattering of the output signal is a problem, choose a solid
state type pressure switch or adjust by PLC.
Installation
Warning
(1) Mount the product after carefully reading and understanding the operation manual.
(2) Do not drop or apply impact during transportation or installation.
It will cause damage to the product or operation failure.
(3) Avoid applying vibration to the product.
If the product is subject to vibration, it can cause a damage or a malfunction.
(4) Do not use in humid or humid areas.
It will cause damage to the product or malfunction.
(5) Shield from ultra violet light and radiation with protective cover.
(6) Employ suitable protective measures in locations where there is contact with oil or welding spatter,
etc.
(7) Check mounting conditions.
The product can be mounted either vertically or horizontally.
(8) Make sure to hold the product body when handling the product, and do not apply tensile force to
the lead wire.
It will cause damage to the product or malfunction.
(9) Avoid repeatedly bending or stretching the lead wire.
Broken lead wires will result if bending stresses or tensile forces are applied to the lead wires.
If the lead wire is damaged, causing the operation failure, replace the product with a new one.
-4-
