SMC Networks HRSH Series, Руководство по эксплуатации

Страница: 27 / 84

HRX-OM-Q033
Chapter 2 Contact input/output communication
HRSH Series 2.4 Setting and checking
2-15
Contact output 3 selected alarm Setting and checking
35.
Press the [SEL] key once.
The set screen of contact output 3 selected alarm is displayed on the digital display.
36.
Select contact output 3 selected alarm from the table below with [
▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 2.4-19 List of set values
Set values Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
function setting of contact output 1 is selected
alarm status signal.
to
Sets selection alarm.
Set range is AL.01 to AL.49.
Communication mode Setting and checking
37.
Press the [SEL] key once.
The set screen of communication mode is displayed on the digital display.
38.
Select communication mode
【
DIO
】
from the table below with [
▲] key or [▼] key, and
confirm by pressing “SEL”.
Table 2.4-20 List of set values
Set value Explanation
Initial value
(Default setting)
Sets LOCAL mode.
○
Sets DIO mode.
Sets SERIAL mode.
PV
SV
PV
SV