SMC Networks EXW1-BMJA Series, Руководство по эксплуатации

Страница: 10 / 100

-10-
No.EX
※※
-OMZ0016
SMC Wireless System
Features and Summary
The SMC wireless system is an I/O distributed system which can be wirelessly connected.
It consists of a combination of a Base that has a function to communicate with the upper-level device (such
as a PLC) or a Base that has a wireless communication function and Remotes.
From an upper-level (PLC) control component, a Base appears to be a single system including Remotes
paired with it, and up to 896 inputs and 896 outputs can be handled per system.
Bases and Remotes are designed to be identifiable by registering their uniquely assigned PIDs (Product IDs)
with each other and operate without malfunctioning even when several Bases and Remotes operate in the
same area.
The packet of the wireless transmit and receive data is encrypted. It is therefore difficult to manipulate the
data.
The SMC wireless system has the following features.
•Quick start-up takes 0.25 sec. (minimum) to connect to the system when the Remote is powered.
*1
•Parameter setting by Near Field Communication (NFC) using a PC (no HW setting).
•The maximum number of inputs/outputs of the system is 896/896
*2, 3
•Up to 15 CC-Link Ver1.10 Remotes or 127 Ver2.00 Remotes can be registered per Base
*4
*1: The Base is in start-up mode, and will change depending on the Remote power-on timing and external influences.
*2: The maximum number of inputs/outputs is 896/896. If there are more than 896 inputs or outputs, they are not recognized.
There might be communication delay depending on the communication load status.
*3: Total number of Remote inputs/output registered in the Base.
*4: The maximum number of units that can be connected is 127. If 127 units is exceeded, the unit I/O will not be recognized.
There might be communication delay depending on the communication load status.