SMC Networks EX600-WD Series, Руководство по эксплуатации

Страница: 31 / 56

# I/O Configurator (NFC version)
(1) I/O Configurator (NFC version) consists of 3 tabs listed below.
Information tab
- The unit information area indicates the unit information.
- System configuration: Displays the configuration information of the base and remote (connected
unit)
- The system configuration of only the wireless master unit is shown in a tree-like profile.
- Detailed information: shows detailed information about the unit selected in the system
configuration.
I/O monitor tab
- Input tab shows the input map information of the wireless unit.
- Output tab shows the output map information of the wireless unit.
Set tab
- Set item: Set the parameters required to operate the base/ remote.
*:
The contents of the setting tab is different between the base and remote.
Refer to the wireless system parameter list for details.
(2) The function of the upper right button of the "I/O Configurator (NFC)" is described below.
Refresh button
- Clicking the refresh button while holding the NFC reader / writer to the base / remote can reflect
the setting of the base / remote on the I/O Configurator screen.
Power supply ON / OFF button
- "Power supply ON" is displayed when power is supplied to the base / remote, and "Power supply
OFF" is displayed when power is not supplied.
R/W detection / R/W no-detection button
- When the NFC reader / writer (R/W) is inserted into the USB port of the PC and the PC detects the
NFC reader and writer, "R/W detection" is displayed. When the PC cannot detect it, "R/W not-
detected" is displayed.
NFC setting button
- When the NFC setting button is clicked, "NFC port / PaSoRi" is displayed on the setting screen.
(1)
(2)
(3)