SMC Networks EliteConnect SMCE21011 Скачать руководство пользователя страница 253

Страница: 253 / 258

LOSSARY

– 253 –

YNAMIC

OST

ONFIGURATION

ROTOCOL

(DHCP)

Provides a framework for passing configuration information to hosts on a

TCP/IP network. DHCP is based on the Bootstrap Protocol (BOOTP), adding

the capability of automatic allocation of reusable network addresses and

additional configuration options.

NCRYPTION

Data passing between the access point and clients can use encryption to

protect from interception and evesdropping.

THERNET

A popular local area data communications network, which accepts

transmission from computers and terminals.

ILE

RANSFER

ROTOCOL

(FTP)

A TCP/IP protocol used for file transfer.

YPERTEXT

RANSFER

ROTOCOL

(HTTP)

HTTP is a standard used to transmit and receive all data over the World

Wide Web.

IEEE 802.11

A wireless standard that supports high-speed communications in the 5 GHz

band using Orthogonal Frequency Division Multiplexing (OFDM). The

standard supports data rates of 6, 12, 24, and 54 Mbps.

IEEE 802.11

A wireless standard that supports wireless communications in the 2.4 GHz

band using Direct Sequence Spread Spectrum (DSSS). The standard

provides for data rates of 1, 2, 5.5, and 11 Mbps.

IEEE 802.11

A wireless standard that supports wireless communications in the 2.4 GHz

band using Orthogonal Frequency Division Multiplexing (OFDM). The

standard provides for data rates of 6, 9, 12, 18, 24, 36, 48, 54 Mbps. IEEE

802.11g is also backward compatible with IEEE 802.11b.

IEEE 802.11

A wireless standard that supports wireless communications in the 2.4 GHz

band using Orthogonal Frequency Division Multiplexing (OFDM). The

standard provides for data rates of 27, 54, 81, 108, 162, 216, 243, 270,

300 Mbps. IEEE 802.11n is also backward compatible with IEEE 802.11b/g.

NFRASTRUCTURE

An integrated wireless and wired LAN is called an infrastructure

configuration.

OCAL

REA

ETWORK

(LAN)

A group of interconnected computer and support devices.

Содержание EliteConnect SMCE21011



































































































































































































































































Результаты поиска

Содержание EliteConnect SMCE21011

Отзывы:

SMC Networks EliteConnect SMCE21011, Руководство пользователя, Страница: 253 / 258

Результаты поиска

Содержание EliteConnect SMCE21011

Отзывы: