SMC Networks EliteConnect SMCE21011 Скачать руководство пользователя страница 234

Страница: 234 / 258

HAPTER

| VLAN Commands

– 234 –

vlan-id

This command configures the default VLAN ID for the VAP interface.

YNTAX

vlan-id <vlan-id>

vlan-id - Native VLAN ID. (Range: 1-4094)

EFAULT

ETTING

OMMAND

ODE

Interface Configuration (Wireless-VAP)

OMMAND

SAGE

◆

To implement the default VLAN ID setting for VAP interface, the access

point must enable VLAN support using the vlan command.

◆

When VLANs are enabled, the access point tags frames received from

wireless clients with the default VLAN ID for the VAP interface. If IEEE

802.1X is being used to authenticate wireless clients, specific VLAN IDs

can be configured on the RADIUS server to be assigned to each client.

Using IEEE 802.1X and a central RADIUS server, up to 64 VLAN IDs can

be mapped to specific wireless clients.

◆

If the VLAN ID has not been configured for a client on the RADIUS

server, then the frames are tagged with the default VLAN ID of the VAP

interface.

XAMPLE

AP(if-wireless g: VAP[0])#vlan-id 3

AP(if-wireless g: VAP[0])#

Содержание EliteConnect SMCE21011



































































































































































































































































Результаты поиска

Содержание EliteConnect SMCE21011

Отзывы:

SMC Networks EliteConnect SMCE21011, Руководство пользователя, Страница: 234 / 258

Результаты поиска

Содержание EliteConnect SMCE21011

Отзывы: