SMC Networks EliteConnect SMCE21011, Руководство пользователя, Страница: 154 / 258

– 154 –
17
SNMP C
OMMANDS
Controls access to this access point from management stations using the
Simple Network Management Protocol (SNMP), as well as the hosts that
will receive trap messages.
snmp-server
community
This command defines the community access string for the Simple Network
Management Protocol. Use the no form to remove the specified community
string.
S
YNTAX
snmp-server community string [ro | rw]
no snmp-server community string
string - Community string that acts like a password and permits
access to the SNMP protocol. (Maximum length: 23 characters, case
sensitive)
ro - Specifies read-only access. Authorized management stations
are only able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
Table 15: SNMP Commands
Command Function Mode Page
snmp-server community Sets up the community access string to permit
access to SNMP commands
GC 154
snmp-server contact Sets the system contact string GC 155
snmp-server location Sets the system location string GC 155
snmp-server enable
server
Enables SNMP service and traps GC 156
snmp-server host Specifies the recipient of an SNMP notification
operation
GC 157
snmp-server trap Enables specific SNMP notifications GC 157
snmp-server user Sets the name of the SNMP v3 user GC 161
snmp-server targets Configures SNMP v3 notification targets GC 162
snmp-server filter Configures SNMP v3 notification filters GC 163
show snmp users Displays SNMP v3 user settings Exec 164
show snmp target Displays the SNMP v3 notification targets Exec 164
show snmp filter Displays the SNMP v3 notification filters Exec 165
show snmp Displays the status of SNMP communications Exec 165