SMC Networks BARRICADETM SMCWGBR14-N2 Скачать руководство пользователя страница 90

Страница: 90 / 132

– 90 –

CCESS

ONTROL

ETTINGS

There are five submenus under the Access Control menu: Rule, Host,

Target, Schedule and Parental Control. Click any of them, and you will be

able to configure the corresponding function.

ULE

Choose menu “Access Control->Rule”, you can view and set Access Control

rules in the screen as shown in the following.

Figure 72: Access Control Rule Management

◆

Enable Internet Access Control

- Select the check box to enable the

Internet Access Control function, so the Default Filter Policy can take

effect.

◆

Rule Name

- Here displays the name of the rule and this name is

unique.

◆

Host

- Here displays the host selected in the corresponding rule.

◆

Target

- Here displays the target selected in the corresponding rule.

◆

Schedule

- Here displays the schedule selected in the corresponding

rule.

◆

Action

- Here displays the action the Router takes to deal with the

packets. It could be Allow or Deny. Allow means that the Router permits

the packets to go through the Router. Deny means that the Router

rejects the packets to go through the Router.

Содержание BARRICADETM SMCWGBR14-N2





































































































































Результаты поиска

Содержание BARRICADETM SMCWGBR14-N2

Отзывы:

SMC Networks BARRICADETM SMCWGBR14-N2, Руководство пользователя, Страница: 90 / 132

Результаты поиска

Содержание BARRICADETM SMCWGBR14-N2

Отзывы: