SMC Networks BARRICADETM SMCWGBR14-N2 Скачать руководство пользователя страница 7

Страница: 7 / 132

OMPLIANCES

– 7 –

UROPE

- EU D

ECLARATION

ONFORMITY

This device complies with the essential requirements of the R&TTE

Directive 1999/5/EC. The following test methods have been applied in

order to prove presumption of conformity with the essential requirements

of the R&TTE Directive 1999/5/EC:

◆

EN 60950-1:2006 + A11: 2009

Safety of Information Technology Equipment.

◆

EN 300 328 V1.7.1: 2006-10

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Wideband transmission systems; Data transmission equipment

operating in the 2,4 GHz ISM band and using wide band modulation

techniques; Harmonized EN covering essential requirements under

article 3.2 of the R&TTE Directive.

◆

EN 301 489-17 V1.8.1/ 2008-04

EN 301 489-17 V2.1.1/ 2009-05

Electromagnetic compatibility and Radio spectrum Matters (ERM);

Electromagnetic Compatibility (EMC) standard for radio equipment and

services; Part 17: Specific conditions for 2.4 GHz wideband

transmission systems and 5 GHz high performance RLAN equipment.

◆

EN 55022: 2006 + A1: 2007

Limits and methods of measurement of radio disturbance

characteristics of information technology equipment.

◆

EN 55024: 1998 + A1: 2001 + A2: 2003

Information technology equipment immunity characteristics limits and

methods of measurement.

◆

EN 62311: 2008

Assessment of electronic and electrical equipment related to human

exposure restrictions for electromagnetic fields (0 Hz - 300 GHz).

This device is a 2.4 GHz wideband transmission system (transceiver),

intended for use in all EU member states and EFTA countries, except in

France and Italy where restrictive use applies.

In Italy the end-user should apply for a license at the national spectrum

authorities in order to obtain authorization to use the device for setting up

outdoor radio links and/or for supplying public access to

telecommunications and/or network services.

This device may not be used for setting up outdoor radio links in France

and in some areas the RF output power may be limited to 10 mW EIRP in

the frequency range of 2454 - 2483.5 MHz. For detailed information the

end-user should contact the national spectrum authority in France.

Содержание BARRICADETM SMCWGBR14-N2





































































































































Результаты поиска

Содержание BARRICADETM SMCWGBR14-N2

Отзывы:

SMC Networks BARRICADETM SMCWGBR14-N2, Руководство пользователя, Страница: 7 / 132

Результаты поиска

Содержание BARRICADETM SMCWGBR14-N2

Отзывы: