SMC Networks BARRICADETM SMCWGBR14-N2 Скачать руководство пользователя страница 107

Страница: 107 / 132

– 107 –

YSTEM

OOLS

Choose menu “System Tools”, and you can see the submenus under the

main menu: Time Settings, Diagnostic, Setting Management, Password,

System Log, Statistics, Local Management and Remote Management. Click

any of them, and you will be able to configure the corresponding function.

The detailed explanations for each submenu are provided below.

IME

ETTING

Choose menu “System Tools->Time Setting”, you can configure the time on

the following screen.

Figure 94: Time Settings

◆

Time Zone

- Select your local time zone from this pull down list.

◆

Date

- Enter your local date in MM/DD/YY into the right blanks.

◆

Time

- Enter your local time in HH/MM/SS into the right blanks.

◆

NTP Server Prior

- Enter the address for the NTP Server, then the

Router will get the time from the NTP Server preferentially. In addition,

the Router built-in some common NTP Servers, so it can get time

automatically once it connects the Internet.

To configure the system manually:

Select your local time zone.

Enter date and time in the right blanks.

Содержание BARRICADETM SMCWGBR14-N2





































































































































Результаты поиска

Содержание BARRICADETM SMCWGBR14-N2

Отзывы:

SMC Networks BARRICADETM SMCWGBR14-N2, Руководство пользователя, Страница: 107 / 132

Результаты поиска

Содержание BARRICADETM SMCWGBR14-N2

Отзывы: