SMC Networks Barricade SMCBR14UP Скачать руководство пользователя | Manualshive

Страница: 3 / 77

background image

Compliances

FCC - Class B
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with instructions, may cause harmful interference to
radio communications. However, there is no guarantee that the interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

FCC Caution: To assure continued compliance, (for example - use only shielded interface cables when
connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.

CAUTION STATEMENT:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 5 centimeters between the
radiator and your body. This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. Note: In order to maintain compliance with the limits of a Class B digital device,
SMC requires that you use a quality interface cable when connecting to this device. Changes or
modifications not expressly approved by SMC could void the user’s authority to operate this equipment.
Attach unshielded twisted-pair cable (UTP) to the RJ-45 port and shielded USB cable to the USB port.

iii

«
1
2
3
4
5
...
»

Содержание Barricade SMCBR14UP














































































Отзывы:

Нет отзывов

Похожие инструкции для Barricade SMCBR14UP

Бренд: D-Link Страницы: 4

Бренд: D-Link Страницы: 2

AirPlusXtremeG DI-624

Бренд: D-Link Страницы: 83

AirPlusXtremeG DI-624

Бренд: D-Link Страницы: 97

Бренд: Everest Страницы: 26

Бренд: jbmedia Страницы: 6

Barricade SMC7004VWBR V.2

Бренд: SMC Networks Страницы: 82

Бренд: TP-Link Страницы: 2

Бренд: Sophos Страницы: 4

Бренд: Tenda Страницы: 30

nova AX3000 EX12

Бренд: Tenda Страницы: 16

Бренд: Tenda Страницы: 72

Бренд: Tenda Страницы: 92

Бренд: Spectrum 24 Страницы: 2

IGAP-420 series

Бренд: ORiNG Страницы: 56

Бренд: ORiNG Страницы: 58

Бренд: NetModule Страницы: 110

Бренд: Netis Страницы: 63

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды