background image

 

 

7.5.7 L2TP  

Layer 2 Tunneling Protocol is a common connection method used for xDSL connections in Europe. It can 
be used to join different physical networks using the Internet as an intermediary. If you have been provided 
with the information as shown on the screen, enter the assigned IP address, subnet mask, default gateway 
IP address, user ID and password, and L2TP Gateway. Configure the Connect mode option to the desired 
settings. “Always On Line” signifies that the broadband router will maintain your Internet connection 
consistently and automatically connect to the Internet after any disconnection. “Manual Connect” signifies 
that the broadband router will establish an Internet connection only when the administrator logs into the 
web management and manually presses the “Connect” button. While using the “Connect On Demand” 
option, if the connection is inactive for longer than the Maximum Idle Time, it will be dropped and will 
automatically re-establish the connection as soon as you attempt to access the Internet again.  

 

 

 

 

 

 

 

 

28 

Содержание Barricade SMCBR14UP














































































Отзывы: