10. Replacement work procedure
！
Caution
1-1) Element Replacement - disassembly [AM30]
Step 1
Step 2
Before replacement, ensure that this equipment is not pressurized.
After replacement, ensure that specified function is satisfied and external leakage is not found before starting operation.
To remove the joint from the body, rotate for approx. 30
degrees with the lock button held down. Align the mating
mark of the body and joint and pull down the bowl
assembly to remove it.
Hold the element as shown below and pull upward to
remove the element assembly.
Hold the element
Align the mating mark
Mating mark of the body
Body
[Step 1]
Element assembly
[Step 1]
Pull upward
Mating mark
of the joint
Lock button
Bowl
assembly
[Step 1]
[Step 2]
Rotate for
30 degrees
Pull downward
Joint
-18-
