SMC Networks 9452TX, Руководство пользователя

Страница: 19 / 62

I
NSTALLING
T
HE
N
ETWORK
C
ARD
1-7
4. Replace the chassis cover on your PC and power it on.
5. The EZ Card 1000 should be automatically configured by the
host computer’s BIOS. However, if you have an older computer,
you may have to manually configure the computer’s BIOS
settings (see Appendix, A “Troubleshooting”).
6. The SMC SuperDisk that accompanies the EZ Card 1000
contains all the network operating system drivers supported by
this card. Please read the “RELEASE.TXT” file on the diskette for
a list of all drivers. Refer to Chapter 2 in this guide for
instructions on installing drivers. Also, a text file is included
with each driver to detail the proper installation procedure. Any
new or updated drivers can be downloaded from SMC’s Web
site (see the back cover of this guide).
PCI Configuration
In most cases, your network card is automatically configured when
you power-up your computer. In certain computers, however, you
must modify PCI settings by running your computer’s BIOS Setup
program. For more information, refer to “PCI Compatibility” on
page A-2.