SMC Networks 8126PL2-F, Руководство по установке

Страница: 41 / 68

4-1
Chapter 4: Making Network Connections
Connecting Network Devices
The SMC8126PL2-F is designed to interconnect multiple network segments (or
collision domains). It can be connected to network cards in PCs and servers, as well
as to hubs, switches or routers. It may also be connected to devices using optional
SFP transceivers.
Twisted-Pair Devices
Each device requires an unshielded twisted-pair (UTP) cable with RJ-45 connectors
at both ends. Use Category 5, 5e or 6 cable for 1000BASE-T connections,
Category 5 or better for 100BASE-TX connections, and Category 3 or better for
10BASE-T connections.
Cabling Guidelines
The RJ-45 ports on the switch support automatic MDI/MDI-X pinout configuration, so
you can use standard straight-through twisted-pair cables to connect to any other
network device (PCs, servers, switches, routers, or hubs).
See Appendix B for further information on cabling.
Caution: Do not plug a phone jack connector into an RJ-45 port. This will damage the
switch. Use only twisted-pair cables with RJ-45 connectors that conform to
FCC standards.