SMC Networks 7824M/FSW - annexe 1 Скачать руководство пользователя страница 637

Страница: 637 / 748

ONFIGURING

ROTOCOL

BASED

VLAN

30-21

protocol-vlan protocol-group

(Configuring Interfaces)

This command maps a protocol group to a VLAN for the current
interface. Use the

form to remove the protocol mapping for this

interface.

Syntax

protocol-vlan protocol-group

group-id

vlan

vlan-id

no protocol-vlan protocol-group

group-id

vlan

•

group-id

- Group identifier of this protocol group.

(Range: 1-2147483647)

•

vlan-id

- VLAN to which matching protocol traffic is forwarded.

(Range: 1-4093)

Default Setting

No protocol groups are mapped for any interface.

Command Mode

Interface Configuration (Ethernet, Port Channel)

Command Usage

• When creating a protocol-based VLAN, only assign interfaces via this

command. If you assign interfaces using any of the other VLAN
commands (such as

vlan

on page 30-8), these interfaces will admit

traffic of any protocol type into the associated VLAN.

• When a frame enters a port that has been assigned to a protocol

VLAN, it is processed in the following manner:
- If the frame is tagged, it will be processed according to the

standard rules applied to tagged frames.

- If the frame is untagged and the protocol type matches, the frame

is forwarded to the appropriate VLAN.

- If the frame is untagged but the protocol type does not match, the

frame is forwarded to the default VLAN for this interface.

Содержание 7824M/FSW - annexe 1













































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 7824M/FSW - annexe 1

Отзывы:

Похожие инструкции для 7824M/FSW - annexe 1

Бренды по названию

Популярные бренды

SMC Networks 7824M/FSW - annexe 1, Руководство по управлению

Результаты поиска

Содержание 7824M/FSW - annexe 1

Отзывы:

Похожие инструкции для 7824M/FSW - annexe 1

Бренды по названию

Популярные бренды