SMC Networks 7824M/FSW - annexe 1 Скачать руководство пользователя страница 532

Страница: 532 / 748

CCESS

ONTROL

IST

OMMANDS

23-18

•

tagged-eth2

– Tagged Ethernet II packets.

•

untagged-eth2

– Untagged Ethernet II packets.

•

tagged-802.3

– Tagged Ethernet 802.3 packets.

•

untagged-802.3

– Untagged Ethernet 802.3 packets.

•

any

– Any MAC source or destination address.

•

host

– A specific MAC address.

•

source

– Source MAC address.

•

destination

– Destination MAC address range with bitmask.

•

address-bitmask

– Bitmask for MAC address (in hexidecimal

format).

• vid – VLAN ID. (Range: 1-4093)
•

vid-bitmask

–

VLAN bitmask. (Range: 1-4093)

•

protocol

– A specific Ethernet protocol number. (Range: 600-fff hex.)

•

protocol

bitmask

– Protocol bitmask. (Range: 600-fff hex.)

Default Setting

None

Command Mode

MAC ACL

Command Usage

• New rules are added to the end of the list.
• The

ethertype

option can only be used to filter Ethernet II formatted

packets.

• A detailed listing of Ethernet protocol types can be found in RFC

1060. A few of the more common types include the following:
- 0800 - IP
- 0806 - ARP
- 8137 - IPX

27. For all bitmasks, “1” means care and “0” means ignore.

Содержание 7824M/FSW - annexe 1













































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 7824M/FSW - annexe 1

Отзывы:

Бренды по названию

Популярные бренды

SMC Networks 7824M/FSW - annexe 1, Руководство по управлению

Результаты поиска

Содержание 7824M/FSW - annexe 1

Отзывы:

Бренды по названию

Популярные бренды