SMC Networks 6624FMST, Руководство по управлению

Страница: 255 / 388

9-65
Configuring Advanced Features
Port-Based Virtual LANs (Static VLANs)
C
o
nf
ig
u
ring Adva
nc
ed
Featu
res
(For information on dynamic VLAN and GVRP operation, see “GVRP” on page
9-73.)
N o t e
For VLAN commands, the command line accepts only one parameter at a time
(instead of combining several in one command).
For example, suppose you have a VLAN named VLAN100 with a VID of 100,
and all ports are set to No for this VLAN. To change the VLAN name to
“Blue_Team” and set ports 1-5 to Tagged, you could do so with these com-
mands:
SMC6624M(config)# vlan 100 name Blue_Team
SMC6624M(config)# vlan 100 tagged 1-5
To move to the vlan 100 context level and execute the same commands:
SMC6624M(config)# vlan 100
SMC6624M(vlan-100)# name Blue_Team
SMC6624M(vlan-100)# tagged 1-5
Similarly, to change the tagged ports in the above examples to No (or Auto , if
GVRP is enabled), you could use either of the following commands.
At the config level, use:
SMC6624M(config)# no vlan 100 tagged 1-5
- or -
At the VLAN 100 context level, use:
SMC6624M(vlan-100)# no tagged 1-5
N o t e
You cannot use these commands with dynamic VLANs. Attempting to do so
results in the message “
VLAN already exists. ” and no change occurs.
Web: Viewing and Configuring VLAN Parameters
In the web browser interface you can do the following:
■ Add VLANs
■
Rename VLANs
■
Remove VLANs
■ Configure GVRP security
■
Select a new Primary VLAN