SMC Networks 6624FMST, Руководство по управлению

Страница: 110 / 388

5-42
Configuring IP Addressing, Time Synchronization, Interface Access, and System Information
System Information
C
onf
ig
uri
n
g
I
P
Ad
dre
ssi
ng,
Ti
m
e
Syn
chr
oni
za
ti
o
n
,
CLI: Viewing and Configuring System Information
System Information Commands Used in This Section
Listing the Current System Information. This command lists the current
system information settings.
Syntax :
show system-information
This example shows the switch’s default console configuration.
Figure 5-24. Example of CLI System Information Listing
Configure a System Name, Contact, and Location for the Switch. To
help distinguish one switch from another, configure a plain-language identity
for the switch.
Syntax:
hostname <name-string>
snmp-server [contact <system contact> ] [location <system location> ]
Note that no blank spaces are allowed in the variables for these commands.
For example, to name the switch “Blue” with “Ext-3002” as the system contact,
and “North-Data-Room” as the location:
SMC6624M(config)# hostname Blue
Blue(config)# snmp-server contact Ext-3002 location North-Data-Room
Blue(config)# show system-information
show system-information below
hostname below
snmp-server [contact] [location] below
mac-age-time page 5-43
time timezone page 5-43
time daylight-time-rule page 5-43
time (date and time) page 5-44
Status and Counters - General System Information
System Name : SMC6624M
System Contact :
System Location :
MAC Age Interval (sec) : 300
Time Zone : 0
Daylight Time Rule : None