SMC Networks 5100 IT Series, Руководство пользователя

Страница: 24 / 38

Model 5100-XX-IT Toxic Gas Sensor Module
Page: 20
Function Display Description Reference
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
Use S or T keys to adjust to new set point
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
M E
S T
Key
--0%LEL- Default Display
Mode ALMRSET: Mode Function - Alarm Reset
Mode CALIB:-- Mode Function - Calibrate
Mode SETUP:--- Mode Function - Set Point Adjustments
Enter Alarms S.P. Function - Alarm Adjust * A Below
Down Relays S.P. Function - Relays Adjust * B Below
Down Gas S.P. Function - Range Adjust * Page 21
Down 4-20mA S.P. Function - 4-20 mA Adjust * Page 21
Down RS-485 S.P. Function - RS-485/Sentry Output Adjust * Page 21
High Alarm Set Point Adjustment Example
Enter H.Alarm S.P. Function - High Alarm Adjust *A
Enter HASP:60- High Alarm Set Point: current = 60
Down (x5) HASP:55- High Alarm Set Point: new = 55
Enter ACK Momentary Acknowledge of new Set Point
H.Alarm S.P. Function - High Alarm Adjust
Relays Set Point Adjustment Example
Enter H. Relay S.P. Function - High Alarm Relay Adjust *B
Down L.Relay S.P. Function - Low Alarm Relay Adjust
Enter Latch
Use
S
or
T
keys to adjust to new relay action
(Latch, Sentry, NonLatc) * indicates current
Down Sentry
NOTE: Sentry indicates that Sentry controls relay
action and not the IT Sensor Module
Down *Sentry High Alarm Relay set to Sentry
Table 4-3A Set-Up Configuration