SMC Networks 2585W-G FICHE Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 62

SMC Networks 2585W-G FICHE Скачать руководство пользователя страница 55

44

SMC2585W-G match.

Are the IP address of the client computer and the IP address of the SMC2585W-G
in the same IP subnet?

Use

WinIPCfg.exe

or

IPConfig.exe

to see the current IP address of the client

computer. Make sure the IP address of the client computer and the IP ad-
dress of the SMC2585W-G are in the same IP subnet.

TIP:

If you forget the current IP address of the SMC2585W-G, use Wireless

Router/AP Browser to get the information (see Appendix B-3).

z

The default gateway of the client computer does not respond to ping from the
client computer.

Solve the preceding problem first.

Are the IP address of the SMC2585W-G and the IP address of the client computer
in the same IP subnet?

If you cannot find any incorrect settings of the SMC2585W-G, the default gateway
may be really down or there are other communication problems on the network
backbone.

z

The DNS server(s) of the client computer do not respond to ping from the client
computer.

Solve the preceding problems first.

If you cannot find any incorrect settings of the SMC2585W-G, the default gateway
of the SMC2585W-G may be really down or there are other communication prob-
lems on the network backbone.

B-3: Other Problems

z

My SMC2585W-G has been set to obtain an IP address automatically by DHCP.
How can I know its acquired IP address so that I can manage it using a Web
browser?

Use the SMC2585W-G Scan Utility (

WLBrwsr.exe

), which is included in the

SMC2585W-G Installation CD. This utility can discover nearby SMC2585W-Gs
and show their MAC addresses and IP addresses. In addition, it can launch the
Web browser on your computer.

NOTE:

On Windows 2000/XP, SMC2585W-G Scan Utility can only be run by a user with

administrator privilege.

NOTE:

SMC2585W-G Scan Utility does not scan the SMC2682W.

«
...
53
54
55
56
57
...
»

Содержание 2585W-G FICHE































































Отзывы:

Нет отзывов