SMC Networks 2585W-G FICHE Скачать руководство пользователя страница 21 | Manualshive

Страница: 21 / 62

SMC Networks 2585W-G FICHE Скачать руководство пользователя страница 21

10

2.4.2. Step 1: Selecting an Operational Mode

Fig. 7. Operational modes settings.

The SMC2585W-G supports 3 operational modes for meeting various wireless connectivity
requirements:

Bridge Repeater

. In this mode, both WLAN interfaces are configured as

LAN-to-LAN bridge interfaces. A bridge repeater forwards packets between
two wireless LAN-to-LAN bridges.

Static AP Repeater.

In this mode, one WLAN interface is configured as an

AP interface, and the other is configured as a LAN-to-LAN bridge interface.

Dynamic AP Repeater.

In this mode, one WLAN interface is configured as

an AP interface, and the other is configured as an AP client-based dynamic
bridge Interface.

Dual AP.

In this mode, both WLAN interfaces are configured as AP interfaces.

The dual AP can handle

twice

the number of wireless clients than a normal

AP.

In any mode, the SMC2585W-G forwards packets between its Ethernet interface and
wireless interface for wired hosts on the Ethernet side and wireless host(s) on the wire-
less side.

There is 1 type of wireless link to bridge between other SMC2585W-G or SMC2586W-G,
and SMC2582W-B bridges.

WDS.

This type of wireless link is specified in the IEEE 802.11 standard for com-

munication between two IEEE 802.11 APs. Wireless packets transmitted along the
WDS link comply with the IEEE 802.11 WDS (Wireless Distribution System) format
at the link layer.

«
...
19
20
21
22
23
...
»

Содержание 2585W-G FICHE































































Отзывы:

Нет отзывов