manualshive.com logo in svg

SMC Networks 2585W-G FICHE, Руководство пользователя, Страница: 12 / 62

Поделиться
Скачать
SMC Networks 2585W-G FICHE Скачать руководство пользователя страница 12

 

 

1

1. Introduction 

1.1. Overview 

The SMC2585W-G is a versatile device that can be configured to be in one of the 3 opera-
tional modes—Bridge Repeater, AP Repeater, Dual AP—for various wireless bridging ap-
plications. With the convenient Web-based user interface, a network administrator can easily 
and clearly manage the SMC2585W-G. 

1.2. Features 

z

 

IEEE 802.11b/g Compliant 

„

 

Operational modes.

 

z

 

Bridge Repeater

. In this mode, both WLAN interfaces are configured as 

LAN-to-LAN bridge interfaces. A bridge repeater forwards packets between 
two wireless LAN-to-LAN bridges.   

z

 

Static AP Repeater. 

In this mode, one WLAN interface is configured as an 

AP interface, and the other is configured as a LAN-to-LAN bridge interface.   

z

 

Dynamic AP Repeater. 

In this mode, one WLAN interface is configured as 

an AP interface, and the other is configured as an AP client-based dynamic 
bridge Interface. 

z

 

Dual AP.

 In this mode, both WLAN interfaces are configured as AP interfaces. 

The dual AP can handle 

twice

 the number of wireless clients than a normal 

AP.  

„

 

64-bit and 128-bit WEP (Wired Equivalent Privacy).

 For wireless data encryp-

tion. 

„

 

IEEE 802.1x/RADIUS.

 

When the SMC2585W-G is in Access Point mode, it can be 

configured to authenticate wireless users and distribute encryption keys dynami-
cally by IEEE 802.1x Port-Based Network Access Control and RADIUS (Remote 
Authentication Dial-In User Service). 

„

 

WPA (Wi-Fi Protected Access).

 The SMC2585W-G supports the new WPA 

standard.    Both WPA-PSK (Pre-Shared Key) mode and full WPA mode are sup-
ported. WPA is composed of TKIP (Temporal Key Integrity Protocol) and IEEE 
802.1x and serves as a successor to WEP for better WLAN security. 

„

 

Enabling/disabling SSID broadcasts.

 

When the SMC2585W-G is in AP mode, 

the administrator can enable or disable the SSID broadcasts functionality for secu-
rity reasons. When the SSID broadcasts functionality is disabled, an STA cannot 
associate with the AP with an ANY network name (SSID, Service Set ID); the cor-
rect SSID has to be specified on the STA. 

„

 

MAC-address-based access control.

 When the SMC2585W-G is in AP mode, it 

can be configured to block unauthorized STAs based on MAC (Media Access 
Control) addresses. The ACL (Access Control List) can also be downloaded from a 

Содержание 2585W-G FICHE































































Отзывы:

Нет отзывов