Technical Information
smb
Trampoline
„π“
Seilspielger•te GmbH Berlin
Page 2
Handwerkerstra‚e 7
15366 Hoppegarten
T49 (0)3342 5083720
T49 (0)3342 5083780
Assembly
The trampoline is erected after the ground has
been excavated (450 mm deep, size according to
number of trampolines) and an even horizontal
surface created.
If bad soil conditions e.g. loamy soil should
prevail it is favourable to insert a drainage
layer.
One must ensure that the framework is lying snug
and does not wobble. This can be checked simply
by standing on it. The play level is around the
trampoline gas to be refilled appropriately.
Removal and/or assembly of the jumping mat
The trampoline is supplied with suspended jumping mat in the frame. The jumping mat must only be
removed when damaged or cleaning the trampoline.
Using the tool supplied, the springs can be loosened from the suspended mat from the top
(Figure 3)
. To
do this, the hock is suspended in the eye of the tension spring which opens from the bottom and slowly
pulled onto the rope which is fastened onto the hook. If the spring extends enough, then the eye, which is
suspended on the jumping mat, falls down automatically. It is the same procedure for the side of the
thimble.
Figure 3
Figure 2
