Technical Information
smb
Skyclimber
Seilspielgeräte GmbH Berlin
Page 7
Handwerkerstraße 7
15366 Dahlwitz-Hoppegarten
Phone (+49 33 42) 50 837 20
Fax (+49 33 42) 50 837 80
4.2 Preassembly of the space net
Preassembly of the space net begins by
screwing the tension systems into the hollow
balls of K30 (Figures 9, 10 and 16). In
doing this, the tensioning cylinder is inserted
into the telescopic sleeve with the M20 bolt
and mounted from the inside with the
tension nut M20 (Size 32) with approxima-
tely 5 turns of the thread. After this, the
tension screws for hollow balls K31 and K32
(Figures 9 and 10) are made which also
mount the tension rope via the fork screws
(Figure 17).
4.3 Tensioning the space net
Firstly the aligned connection on the hollow
ball K29 is to be solidly secured. Tensioning
of the space net begins on the hollow balls
of K31 and K32 which are screwed to the
locking nut (Figure 17) using the special
spanner supplied. After doing this tensioning
is made on K30 hollow balls up to the
marking (Figure 16). Finally, the space net
must be under a tension having an even
strength throughout.
Remember!
It is imperative that at all tension points, the ropes under tension do not turn. If necessary counter
this with a suitable tool.
Figure 16
Figure 17
