Technical Information
smb
Skyclimber
Seilspielgeräte GmbH Berlin
Page 6
Handwerkerstraße 7
15366 Dahlwitz-Hoppegarten
Phone (+49 33 42) 50 837 20
Fax (+49 33 42) 50 837 80
4. Space net:
4.1 Unpacking the space net
As shown in Figure 15, the space net is to be taken until it is vertically under the equipment top. The
supplied pulley is to be secured on the K29 hollow ball as shown in the pulley setup in Figure 15. The
space net can be hoisted out of the crate using the attached rope and assembled to the hollow ball
connection K29 with the preassembled nut M20 / SIZE 30 (which must firstly be completely loosened).
Insertion of the tensioning cylinder and fork screws into hollow balls of K30, K31 and K32 can be
simplified by tension support from the supplied rope. When securing the tension nut, care must be taken
to ensure the correct alignment of the ropes and that they correspond to their run progression in the
space net (Figure 5).
Special attention should be given to space net alignment with Skyclimbers having additional
elements such as net troughs and climber walls. Do not position seating troughs behind the
climber panels because these can be hardly used!
Figure 15
Pulley setup
