SMAY SCD Скачать руководство пользователя страница 71

Страница: 71 / 81

Operation and Maintenance Manual

– SCD Smoke Dampers

Version 1
Date 04 2018

Page 71 of 81

The RT 2 smoke extraction push button is used for manual alarm triggering in smoke

extraction systems.

In the RT 2-K version the push button has one LED indicator

– the red one, which

indicates ALARM. In the RT 2-K-BS version the push button has three LED indicators: the
red one

– ALARM, the yellow one – DAMAGE, and the green one – OK.

The push button should be located at a place, where it would be easily accessible for

users and service teams, preferably at/near escape routes. Electric connections should be
made by authorized persons.

The alarm is triggered by pushing the emergency push button, after breaking the

glass in the housing.

In order to cancel the alarm release the push button mechanical lock after opening

the housing.

Technical Data:

Power supply

24 V=, 100 mA max.

Operating temperature range

-100C to +550C

Air humidity

20% to 80% (without condensation)

Ingress Protection Rating of the housing

IP 42

Dimensions (height x width x depth)

125 x 125 x 35 mm

Way of activation

manual

Range of cross-sections of the cables to connect

1.0 mm

Housing

ABS, lockable

6.7.

VENTILATION PUSH BUTTON

Rys. 54. Ventilation push button.

The LT-AP push button makes it possible to control the ventilation function in a

comfortable and safe way. It is made as a surface-mounted element.

Technical Data:

•

Maximum contact load 10 A / 250 V AC

•

IP44 Ingress Protection Rating of the housing

•

Light grey colour

Содержание SCD


















































































Результаты поиска

Содержание SCD

Отзывы:

Бренды по названию

Популярные бренды

SMAY SCD, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание SCD

Отзывы:

Бренды по названию

Популярные бренды