HD-TVI Speed Dome
·
Quick Start Guide
10
Figure 2-4
Key point Configuration
4.
Configure key point parameters, such as the key point No., duration of staying for one key
point and speed of patrol. The key point corresponds to the preset. The
Key Point No.
determines the order at which the PTZ will follow while cycling through the patrol. The
Duration
refers to the time span to stay at the corresponding key point. The
Speed
defines the
speed at which the PTZ will move from one key point to the next.
5.
Click the
Add
button to add the next key point to the patrol, or you can click the
OK
button to
save the key point to the patrol.
You can delete all the key points by clicking the
Clear
button for the selected patrol, or click
the
Clear All
button to delete all the key pints for all patrols.
Configuring Patrol by OSD Menu
Steps:
1.
Call the preset 95 to enter the main menu and move the cursor to enter patrol configuration
submenu:
MAIN MENU > DOME SETTINGS > PATROLS
PATROLS
PATROL NO. 1
EDIT PATROL
PREVIEW
CLEAR PATROL
PATROL_D 30S
BACK EXIT
Figure 2-5
Patrol Configuration Menu
2.
Select the patrol number.
1).
Move the cursor to
PATROL NO.
and click
IRIS+
to enter edit mode.
2).
Click the up and down direction buttons to select the number of the patrol that is to be
configured.
3).
Click
IRIS+
again to confirm the settings and enter the edit mode of this column.
Содержание H20TVISD302
Страница 1: ......
