HD-TVI Speed Dome
·
Quick Start Guide
6
Switch No.
Description
8
Turn on the resistor
OFF
Turn off the resistor
ON
1.3
Installation
1.3.2
Installing the Bracket
Before you start:
The wall must be thick enough to take the expansion screws.
Please make sure that the wall is strong enough to withstand more than 8 times the weight of
the dome.
Steps:
1.
Check that the type of the bracket and the number of accessories are correct, as shown in the
figure below.
Figure 1-7
Wall Mount Bracket, Nuts and Flat Washers
2.
Drill 4 screw holes in the wall to match the holes of the bracket. Insert M8 expansion screws
into the mounting holes.
Figure 1-8
Drill Mounting Holes
3.
Attach the wall bracket to the wall by aligning the 4 screw holes.
4.
Secure the wall bracket with 4 hex nuts and washers.
Содержание H20TVISD302
Страница 1: ......
