12
Position the mounting template tool provided and mark all three pilot holes. Drill a 3mm hole
on the two outside holes and fit the mounting screws provided. Place the template tool back
over the screws and tighten the screws until the template tool can just slip on and off the
screws (ensure the tool in not too loose).
Drill the bottom hole to 12 mm (cable hole).
Place the Display Unit keyholes over the two screws and gently pull down. If the screws have
been tightened to the correct depth the Display will clip down and self tighten.
Pilot Holes
Pilot Hole
Mounting Instructions
Mounting the FR-8000 Display Unit
