iSmartIMMO 801 User Manual
l
37
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in
engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter
is replaced, it is necessary to reset the catalytic converter learned value stored
in the engine ECU.
7.26 Stop/Start Reset
This function is used to open or close the automatic start-stop function via
setting the hidden function in ECU (provided that the vehicle has a hidden
function and supported by hardware).
8 Update
This module enables you to update the diagnostic software & App and
frequently used software.
8.1 Update Diagnostic Software & APP
Tap
Update
on the Job Menu to enter the update center.
By default, all diagnostic software is selected. To deselect certain software, tap
Unselect
, and then check the box next to vehicle model. Tap
Update
to start
downloading.
Once download is finished, the software packages will be installed automatically.
8.2 Renew Subscription
If the software subscription is due or expires, the system will prompt you to renew
your subscription.
Tap
Renewals
on the bottom of the screen to enter the payment screen.
1. Tap
Subscription Renewal Card
(*need to buy it from the local dealer where you
purchased the tool).
2. Input the 24-digit pin code of Subscription Renewal Card and then tap
Submit
to
finish the renewal.
3. Go to update center to update the diagnostic software.
9 Feedback
This function enables you to feedback the diagnostic issues to us for analysis and
troubleshooting.
Содержание iSmartIMMO 801
Страница 4: ......
Страница 29: ...iSmartIMMO 801 User Manuall 25 8 Tap YES to enter the gearbox replacement screen...