SmartSafe iSmartIMMO 801, Руководство пользователя, Страница: 40 / 48

iSmartIMMO 801 User Manual
l
36
the ambient light intensity, the adaptive headlamp system may decide whether
to automatically turn on the headlamps, and timely adjust the headlamp lighting
angle while monitoring the vehicle speed and body posture.
7.14 Sunroof Initialization
This function can set the sunroof lock off, closed when it rains, sliding / tilting
sunroof memory function, temperature threshold outside the car etc.
7.15 Suspension Calibration
1. This function can adjust the height of the body.
2. When replacing the body height sensor in the air suspension system, or control
module or when the vehicle level is incorrect, you need to perform this function
to adjust the body height sensor for level calibration.
7.16 EGR Adaption
This f
unction is used to learn the EGR (Exhaust Gas Recirculation) valve after it is
cleaned or replaced.
7.17 Windows Calibration
This feature is designed to perform door window matching to recover ECU
initial memory, and recover the automatic ascending and descending function
of power window.
7.18 Seats Calibration
This function is applied to match the seats with memory function that are
replaced and repaired.
7.19 Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
7.20 Language Change
This function is used to change the system language of the vehicle central
control panel.
7.21 A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
7.22 Coolant Bleed
Use this function to activate the electronic water pump before venting the
cooling system.
7.23 Transport Mode
In order to reduce power consumption, the following functions may be disabled,
including limiting the vehicle speed, not waking up the door opening network,
and disabling the remote control key, etc. At this time, the transport mode
needs to be deactivated to restore the vehicle to normal.
7.24 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea
reset operation is required.
7.25 NOx Sensor Reset