SAFETY
PRECAUTION
INITIAL
USE
ST
ART CALIBRA
TION
TARGET P
ATTERN KIT
PRODUCT PROFILE
ADAS Mobile
Calibration Tool
User Manual
IV
www.newsmartsafe.com +86 755 84528537
Park (for automatic transmission) position to avoid injury.
5. NEVER smoke or allow a spark or flame in vicinity of battery or engine. Do not operate the tool in
explosive atmospheres, such as in the presence of flammable liquids, gases, or heavy dust.
6.
Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
7. Wear an ANSI-approved eye shield when testing or repairing vehicles.
8. Put blocks in front of the drive wheels and never leave the vehicle unattended while testing.
9. Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark
plugs. These components create hazardous voltage when the engine is running.
10. To avoid damaging the tool or generating false data, please make sure the vehicle battery is fully
charged and the connection to the vehicle DLC (Data Link Connector) is clear and secure.
On Using X-431 ADAS Mobile Calibration Tool
In order to avoid incorrect handling and injury to the user or destruction of the X-431 ADAS Mobile
calibration tool arising from this, pay attention to the following:
•
Only assemble the X-431 ADAS Mobile calibration tool according to the operating instructions.
•
Protect the X-431 ADAS Mobile calibration tool from water and strong impacts.
•
Protect the X-431 ADAS Mobile calibration tool from long periods of exposure to solar radiation.
• The light source should ensure that there is no reflected spot on the calibration panel.
• In the field of view of the camera, there should be no direct light source into the camera, otherwise the
camera will reduce the exposure so that the captured calibration pattern becomes darker, adversely
affecting the calibration.
•
The light source should ensure uniform illumination distribution in the calibration workstation.
•
Do a regular check and service for the X-431 ADAS Mobile calibration tool.
On Using Vehicle
When working on the vehicle, please carefully read the following information:
• Make sure the vehicle is parked with all wheels on an even floor surface.
•
The park position should also be engaged in automatic vehicles.
•
Before calibrating, make sure the vehicle system is working properly and no trouble codes are stored in
ECU memories.
•
After a calibration is completely performed, remember to unplug the VCI device from the vehicle’s
diagnostic socket.
On Using Laser Devices
•
The laser radiation can cause serious eye injury.
•
Do not stare into the laser beam.
• Never look directly into the laser beam because it may cause damage to / destruction of the retina.
•
Do not position the laser beam so that it unintentionally blinds you or others.
•
Do not operate the laser level near children or let children operate the laser level.
•
Do not look into a laser beam using magnifying optical devices such as binoculars or a telescope, as this
will increase the level of eye injury.
•
Do not remove or deface warning labels on the laser device.
•
Do not disassemble the laser level, laser radiation can cause serious eye injury.
• Do not operate the laser in explosive atmospheres such as flammable liquids, gases or dust. Sparks from
