SAFETY
PRECAUTION
INITIAL
USE
ST
ART CALIBRA
TION
TARGET P
ATTERN KIT
PRODUCT PROFILE
ADAS Mobile
Calibration Tool
User Manual
24
www.newsmartsafe.com +86 755 84528537
2.3 General Calibration Operations for LDW System
2.3.1 Precondition for the Use of the X-431 ADAS Mobile
Regard the following in order to use the X-431 ADAS Mobile:
• Vehicle system is working properly.
• No trouble codes stored in ECU memories.
• Prepare vehicle-specific calibration reference pattern.
• A LAUNCH’s scanner supporting ADAS system calibrating is required (sold separately).
• Front & rear axle track is properly adjusted.
• To make you work smoothly and calibrate accurately, please make sure the following workstation
requirement are met (See Chapter 2.4.1.1 ~ Chapter 2.4.1.3).
2.3.1.1 Workstation size
A. For front cameras
Distance A = the width of the cross member
Distance B = about 1m (from the cross member to the wall)
Distance C = at least 0.5m (from the edge of the cross member to other obstacles)
Distance D = varies from vehicle to vehicle, about 1.5m is strongly recommended (from the calibration panel
to the vehicle)
Distance E = reserved for about 1m (from the vehicle to other obstacles)
Distance F = at least 0.5m (a lane for technician to walk through)
