SAFETY
PRECAUTION
INITIAL
USE
ST
ART CALIBRA
TION
TARGET P
ATTERN KIT
PRODUCT PROFILE
ADAS Mobile
Calibration Tool
User Manual
III
www.newsmartsafe.com +86 755 84528537
Safety Precautions
The X-431 ADAS Mobile calibration tool is exclusively intended for use on a vehicle. To avoid personal
injury, property damage, or accidental damage to the product, read all of the information in this section
before using the product:
•
To operate the X-431 ADAS Mobile calibration tool properly, user must have knowledge of automotive
technology and is therefore aware of the sources of danger and risks in the repair shop and on vehicles.
•
All notes given in the individual sections of the operating instructions apply. In principle it is required to
follow the steps and safety precautions stated below.
•
Furthermore, pay attention to all general instructions from labor inspectorates, trade associations and
vehicle manufacturers as well as all laws, legal ordinances and instructions which have to be commonly
obeyed by a repair shop.
The safety messages herein cover situations SMARTSAFE is aware of. SMARTSAFE cannot know,
evaluate or advise you as to all of the possible hazards. You must be certain that any conditions or service
procedure encountered do not jeopardize your personal safety.
WARNING SYMBOLS AND DEFINITIONS
This safety alert symbol is used to alert you to potential injury hazards. Obey all
safety messages that follow this symbol to avoid possible injury.
Indicates an imminently hazardous situation which, if not avoided, could result in
death or serious injury to the operator or to bystanders.
Indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury to the operator or to bystanders.
Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury to the operator or to bystanders.
Addresses practices not related to personal injury.
When an engine is operating, keep the service area well-ventilated or attach a building exhaust removal
system to the engine exhaust system. Engines produce various poisonous compounds (hydrocarbon,
carbon monoxide, nitrogen oxides, etc.) that cause slower reaction time and result in death or serious
personal injury.
•
Do not use a damaged battery charger.
•
The built-in Lithium battery is factory replaceable only. Incorrect replacement or tampering with the
battery pack may cause a explosion.
Read all safety warnings and instructions.
*Note: Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
1. Always perform automotive testing in a safe environment.
2. Do not connect or disconnect any test equipment while the ignition is on or the engine is running.
3.
DO NOT attempt to operate the tool while driving the vehicle. Have second personal operate the
tool
.
Any distraction may cause an accident.
4. Before starting the engine, put the gear lever in the Neutral position (for manual transmission) or in the
