VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.
EN
7
MAINTENANCE
Step1
. Before cleaning,
always disconnect the
pump from the power
source and remove the
pump cover.
Step 2
. Remove the
impeller cover to
expose the impeller
assembly. Remove
the impeller assembly
by gently pulling on
the impeller blades.
The impeller is held in
place by a magnet.
Step 3
. Use a soft cloth or brush and warm water to clean the
impeller and the inside of the impeller housing.
Step 4
. Reassemble all pump parts and place in water before
reconnecting to the power source.
Regular cleaning of the pump may be necessary depending upon
the environment which it is operated. Clean the pump when it is
visibly soiled or when a drop in performance is detected. Clean
pump in 4 easy steps!
TROUBLESHOOTING
IF THE PUMP FAILS TO OPERATE:
• Check to make sure the power cord is plugged in, the pump is
getting power.
• Check the pump outlet and any tubing, fountains, spitters etc.
for kinks or obstructions.
