Pax D210 and D200 Wi-Fi
PAPER ROLLS
SETTING UP YOUR EFTPOS EQUIPMENT
TRANSACTIONS OVERVIEW
• D210 terminals use standard 57mm (w) x 40mm (dia) thermal paper rolls.
• D200 DOES NOT HAVE A RECEIPT PRINTER.
Replacing printer paper:
1. Engage printer cover release flap to open printer bay.
2. Remove existing roll core and place new roll in printer well (when replacing a paper roll, the
tongue of paper should be feeding up and out towards the top of the terminal).
3. Pull out tongue of paper so it is coming out of feeder and close the printer cover.
To order paper rolls or other accessories please contact Smartpay on
0800 476 278
or visit our
website
smartpay.co.nz
Please read the Getting Started Letter that is provided with your Smartpay EFTPOS equipment. Our
technical helpdesk team (THD) can be contacted if you would like any assistance and to release the
security key and perform your initial Logon.
1. Power on unit by pressing and holding down power key for 3 seconds then release and the screen
comes on.
a. D210 – key on side of unit
b. D200 – key on top of unit
2. Follow prompts to connect unit to your Wi-Fi network
3. Terminal performs boot up sequence.
4. Contact Smartpay THD to release security key and perform initial Logon.
For a more consistent contactless card experience the swipe/insert quick start option has been
removed. To follow best security practices for payment card handling the customer should always
present their own card (swipe/insert/tap) to the terminal wherever possible.
