Getting Started
To begin using your SyncPix™ digital picture frame, start by connecting
the stand or hanging the frame on a wall.
The stand is connected by inserting the round knob at the top into the
opening on the back of the frame and sliding it upward. The display
angle of the frame can be adjusted by sliding the stand up or down. The
frame can be displayed vertically by rotating the stand 90 degrees
counter-clockwise.
The slot on the back of the frame can also be used to hang the unit on
a wall.
Connect the power adapter to the input jack on the right side of the
frame and plug the adapter into an active power outlet. Turn on the
power by pressing the switch just above the input jack.
After a few seconds, a slide show of pre-loaded photos will be displayed.
These photos can be deleted later.
5
