7
© 2017 smartOar
®
The software versions are shown in the upper part of this screen.
There are three "computers" in the box and each has its own version of
software.
The oar channel box is the radio frequency (rf) channel that the oars
use when transmitting data. While the tablet is booting, it is also scanning
all the available rf channels for the one with the least noise and
interference. After capturing the oars/devices, it moves them to the lowest
noise channel and operates from there.
The date boxes and time boxes are self-explanatory.
Play/pause
jumps from box to box. Use
back
and
forward
buttons change the values.
The threshold multiplier field affects the sensitivity of the stroke
detector. It is probably best to leave this set to "2", although the curious
may certainly play with the setting.
If you press the
record
button to exit, the changes will be saved.
If you press the
mode select
button to exit, the changes
won’t
be saved.
D. Turning the Tablet Off
To turn the Tablet off, press the
power
button. A message will appear
telling you to press the power button again within three seconds to
complete the process. The intent is to avoid inadvertently turning the
Tablet off at an inopportune time (repeated personal experience).
