12
© 2017 smartOar
®
Oar along with the Gate Angle Sensor. The Gate Angle Sensor curve will
assume the color of the Oar curve and its color will be controlled by the
associated Oar button. Accelerometers can also be associated with an Oar
because an Accelerometer can be mounted on a rower’s seat to give
insights regarding seat motion vs. the Oar force curve (shooting the slide).
After it is associated, you can turn a curve on or off but is color is
determined by the oar to which it is associated. Again, in older tablets, you
cannot turn a curve in the
9
th
/boat
position on or off while
recording
or
during
playback.
C. Changing the Size of the Curves
In
Display Mode
and
Playback Mode
, the height of the force curve
on the display can be increased by simultaneously pressing the
forward
and
oar
8
buttons. Simultaneously pressing the
back
and
oar
8
buttons
will decrease the size of the curves. Repeat each key press to continue
changing the size of the curves. The new size will be in effect for both
Display Mode
and
Playback Mode
until the Tablet is turned off. To change
the size of the Accelerometer curves, simultaneously press
bookmark/boat
and
forward
(increase) or
back
(decrease). You cannot
change the size of the gate angle sensor curves.
TIP:
The change in size will take effect on the next stroke.
D. Changing the Display Brightness
The Tablet backlight display is set to maximize visibility in direct
sunlight. This can be too bright for early morning rowing. Reduce
