17
© 2017 smartOar
®
recording, the stroke count in parentheseis shows the number of strokes
since the recording was started.
While in
Display Mode
, the onscreen instructions tell users they can
press and hold
play
(for about two seconds) to move into
Playback
Mode
.
Here you can select any recorded file for viewing by using the
back
and
forward
arrow buttons to scroll to the desired stroke file. The files are
named by the time and date that they were recorded. Each time you press
record
a separate stroke file will be created.
While in
Playback Mode,
you can
pause
the display, and then use
forward
or
back
to move to the next or previous stroke. You can also turn
each device’s curves
on/off/black
just as in the
Display Mode
.
In
Playback Mode
, you can stepwise increase the rate the strokes are
displayed by pressing the
forward
button repeatedly. Pressing the
back
button will reduce the rate one step. Repeating will get you back to the
base stroke rate. The playback rate is shown in the upper left corner of the
screen.
TIP:
Use the
mode select
button to move between
Oar Select
,
Display
, and
Playback Modes
in the Tablet.
B. Stopwatch Feature
A stopwatch feature is activated when
record
is pressed.
Elapsed Time
and
Stroke Count
are displayed on the top right of the
display. When
record
is pressed again to stop recording, the total elapsed
time to 1/100
th
of a second is displayed along with the number of strokes
during the interval. The stopwatch is reset at the start of the next
