About X10 Toggle Wall Switch
This elegant and full-featured switch gives you local control and X10 capabilities for the connected light or
other non-dimmable load. Remotely turn the light on and off from an X10 controller or send commands to
other X10 devices when you use X10 Toggle Wall Switch’s toggle.
Switch Toggle
(Top: On
Bottom: Off)
Set button
and
Status LED
Wallplate
(sold separately)
Features & Benefits
Replaces a standard light switch in minutes and programs in seconds
Fully X10 compatible to receive commands from any X10 controller
When controlled locally, the switch transmits X10 signals to other devices
Controls all standard incandescent loads up to 480 Watts or resistive loads up to 15 Amps
Status LED indicates setup mode activity and signal transmission
Adjustable LED brightness
3-way and greater lighting circuit capability
90-day
warranty
What’s in the Box?
1x - X10 Toggle Wall Switch Module
2x - Mounting screws
4x – Wire nuts
1x - Quick-Start Guide
Page 3 of 7 X10WS467 Rev: 10/7/2011 6:14 PM
