HMU8-860 ATS Remote Monitoring Controller User Manual Page 6 of 50
2
PERFORMANCE AND CHARACTERISTICS
HMU8-860 ATS remote monitoring controller (hereinafter called monitoring module) is used for
the remote data monitoring and control of HAT860 MV-ATS controller (hereinafter called master
control module). The two modules communicate via RS485 interface.
Main features are the followings:
─
8-inch color LCD with 800*600 resolution, HMI display and capacitive touch screen operation;
─
Chinese and English operations are optional for on-site and convenient for commissioning staff;
─
Home screen displays master control module dual power configuration and real-time status of
power, ATS, generator and load breaker;
─
Control manual/auto, auto transfer/restore, auto transfer non-restore of master control module;
─
Stepwise switch status monitoring and control function, max. 24-way load breakers can be
controlled;
─
Realize one-key close/open control and genset start/stop operation of master control module in
manual mode;
─
Display defined character string of master control module;
─
Display S1/S2 voltage, current, frequenxy and other electric parameters of master control
module in real time;
─
Display load information like active power, reactive power, apparent power and power factor of
master control module;
─
Display S1/S2 accumulated active energy, reactive energy, close times, auto transfer times,
mains failure transfer times of master control module;
─
Display current continuous supply time, S1/S2 accumulated supply time, auto transfer running
time of master control module;
─
Display master control module alarm information in real time;
─
Event log function of master control module, adjust its real-time clock;
─
Allow users to change and set the parameters of master control module;
─
RS485 communication parameters of monitoring module and master control module has auto
synchronization function;
─
Suitable for 12/24VDC battery voltage environment;
─
With power indicator, communication indicator, alarm indicator;
─
Monitoring module screen has 10-level brightness, which can adjust brightness according to
environment;
─
Monitoring module has 4 RS485 interfaces, 1 CANBUS interface, 1 ETHERNET interface;
─
RS485 interface and network parameters can be configured and cannot ne lost even in case of
system dropout;
─
USB device interace is used for upgrading controller firmware;
─
USB master interface is used for upgrading controller screen picture and font file;
─
Rubber seal ring is installed between enclosure and control panel, front panel protection can
reach IP65;
─
Enclosure is built by aluminium alloy, which is beautiful and strong;
─
Modular design, pluggable terminal, embedded-in installation, compact structure and easy
mounting.
