HMU8-860 ATS Remote Monitoring Controller User Manual Page 20 of 50
4.3.1
PARAMETER CONFIGURATION OF MONITORING MODULE
Fig.11 – Parameter Configuration Interface of Monitoring Module
The parameter configuration steps of the monitoring module are as follows:
1)
Select parameters to be configured by the tree diagram;
2)
Set parameters to be changed in the right window. Press the numeric keypad key when
necessary to pop up the numeric keypad;
3)
After the parameter configuration, press the exit key to pop up the parameter saving dialog
box and save according to the prompts.
4.3.2
PARAMETER CONFIGURATION OF MASTER CONTROL MODULE
Fig.12 – Parameter Configuration Interface of Master Control Module