Smartgen HLS300, Руководство пользователя

Страница: 6 / 14

HLS300 Power Share Module User Manual
HLS300 Power Share Module Version 1.4 2019-05-16 Page 6 of 14
4 PANEL INDICATORS AND TERMINALS DESCRIPTION
Fig.1 - Mask Drawing
Table 4 - LEDs Definition Description
Indicator Color Description Note
Power Green Power indicator, the lamp illuminates when the power is normal.
MSC OK Green
MSC communication normal indicator, and it shall flash once for
each data received.
ID ERR Red
MSCID setting error indicator, and the lamp illuminates when two
module IDs are the same.
TEST Green Indicates test mode.
-P Red
When reverse power reaches the set value and delay is expired,
the relay output lamp will illuminate.
C/B OPEN Red When the open relay is outputting, the lamp will illuminate.
UNLOADING Green When the load is transferring, the lamp will illuminate.
FIXLOAD Green
Fixed load mode indicator, the lamp will illuminate when input is
active.
UNL Green When Unload is active, the lamp will illuminate.
C/B Green When the main switch close is active, the lamp will illuminate.
UG Green
When gens is normal, the lamp will illuminate; when gens is
abnormal, the lamp will flash; when there is not power, the lamp
will extinguish.
P<20% Red
When the load power is less than 20% of Pn, the lamp will
illuminate.
P>80% Red When the load power is over 80% of Pn, the lamp will illuminate.
LOW-P Red
When the load is below the set value and delay is over, the lamp
will illuminate.
INCR. Green When the raising speed pulse is sent, the lamp will illuminate.
DECR. Green When the decreasing speed pulse is sent, the lamp will illuminate.
60HZ Green
When the two stitches
– and IN are short circuit, while the rated
frequency is 60Hz, the lamp will illuminate.
50/60HZ to
choose