HGM1780
Automatic
Genset Controller
ISSUE 2013-04-03
Version1.7
Page 21 of 24
HGM1780 Automatic Genset Controller
﹡
Remark 1:
Pressing
button during parameter setting will immediately exit the
set parameter.
﹡
Remark 2:
If the generator is in manual mode and crank disconnect condition is set
as 2 (magnetic pickup + generator frequency) or 5 (generator frequency +
magnetic pickup + oil pressure) and generator frequency and speed are NOT
equal to zero, pressing and holding
and
for 0.5 seconds will lead to the
controller automatically adjusting the flywheel teeth number according to
generator frequency and generator poles number.
