HAT530P/HAT530PC Series ATS Controller User Manual Page 10 of 18
6
PARAMETER CONFIGERATION
6.1
PARAMETERS TABLE
Table 4 – Parameters Setting Table
No
.
Item
Range
Default
Description
01 1# Normal Delay
(0-60)s
Can be set via
controller
potentiometer
It is the delay of #1 power from voltage
abnormal to voltage normal. Generally, it
is 10s.
02 1# Abnormal Delay (0-60)s
5
It is the delay of #1 power from voltage
normal to voltage abnormal.
03 2# Normal Delay
(0-60)s
Can be set via
controller
potentiometer
It is the delay of #2 power from voltage
abnormal to voltage normal. Generally, it
is 10s.
04 2# Abnormal Delay (0-60)s
5
It is the delay of #2 power from voltage
normal to voltage abnormal.
05 Close Delay
(0-20)s
5
Closing relay output pulse. If set as zero,
it is continuous output.
06 Open Delay
(1-20)s
5
Open relay output pulse.
07 Transfer Interval
(0-60)s
1
It is the delay from 1# power open to 2#
power close or from 2# power open to 1#
power close.
08 Exceed Transfer
(0-20.0)s
0.0
It is the extra output delay of the closing
relay after the closing signal has
received.
09 Start Delay
(0-3600)s
1
When voltage is abnormal, start delay
begins; start signal is initiated after the
delay has expired.
10 Stop Delay
(0-3600)s
90
When starting, if the mains voltage is
normal, stop delay begins; stop signal is
initiated after the delay has expired.
11 AC System
(0-3)
0
0. 3-phase 4-wire
1. 2-phase 3-wire
2. Single phase
3. 3-phase 3-wire
12 Rated Volt
(100-240)V 230
AC system rated voltage.
13 Rated Frequency
(50.0-60.0)
Hz
50.0
To offer standards for detecting of
over/under frequency.
14 Over Volt Enable
(0-1)
1
0: Disable
；
1: Enable
15 Over Voltage
(100-120)% 115
Voltage upper limit; it is abnormal when
the voltage has exceed the set value.
16 Over Volt Return
(100-120)% 113
Voltage upper limit return value; it is
normal only when the voltage is below
